Basic Pro 12

Industrial technology for the price of a cobot system

HALTER Basic Pro 12
HALTER Basic Pro 12

Basic Pro 12

Turning/Milling

Basic Pro is our basic loading robot for turning and milling.

  • For turning and milling

  • Maximum diameter 135 mm - maximum dimension LxW 135 mm x 135 mm

  • Industrial Fanuc robot and high-quality components for a long, reliable service life

  • New series set-up within 5 minutes

  • No compromise on safety - with floor scanner and safety zone

  • Minimum floor space

  • Industrial technology for the price of a cobot system

HALTER BasicPro 12 - front-4 HALTER Basic Pro 12 - side-3

 

Intuitive and accessible

  • No robot experience required

  • Programme configured in just a few steps

  • Setup time of less than 5 minutes

  • Ingenious in its simplicity

Capacity & Specifications

Workpiece diameter (min - max)0.39" - 5.31"
Minimum workpiece (L x W)0.39" x 0.39"
Maximum workpiece (L x W)5.31" x 5.31"
Height of workpiece (min - max)0.39" - 5.91"
Maximum load capacity robot arm26.45 lbs
Maximum total weight on table 793.66 lbs
Max. number of workpieces for grid plate 10-20 mm188
Max. number of workpieces for grid plate 10-35 mm104
Max. number of workpieces for grid plate 10-55 mm64
Max. number of workpieces for grid plate 10-85 mm38
Max. number of workpieces for grid plate 10-115 mm18
Max. number of workpieces for grid plate 10-135 mm14
Grid plate is height-adjustable in several positions
Rigid industrial construction
Placed on 4-point self-centering anchors
Fanuc 6-axis robot arm26.45 lbs
Workpiece turnover station for two-sided machiningOption
Status lightOption
Can be connected to any CNC machine
Movable for transport and maintenance with easy repositioningby pallet truck
Automatic servo-driven door opener with integrated safety mechanismOption

Standard Features

Intuitive and graphical programming in 12 steps
Touch screen 15 inch
Free choice of pre-installed language
Graphic representation of machine utilization
Input can be entered in inches or mm
Automatic program storage

Standard functionalities

Inside and outside gripping
Workpiece loading in chuck with or without pressure star
Adjustable air blow distance
Working with spindle orientation of the CNC machine
Eccentric loading and unloading
Robot park positioning
3-finger gripper or 2-finger gripperChoice
Separate grippers for raw and machined workpieces
Air blow system
Workpiece detection
Quickly adjustable gripper fingers
Workpiece-specific gripper fingersOption
Steplessly adjustable gripping force
Compact gripper design
Fanuc DCS area in combination with the Sick floor scanner
Closed safety circuit
270º laser scanner with stop and go function
Floor scanner slows down and stops the robot arm if operator approaches
Voltage 208 V
Peak consumption30 A
Compressed air pressure94.3 psi
Length67.32"
Width30.70"
Height86.61"
Total weight 1358 lbs

Capacity

Workpiece diameter (min - max)0.39" - 5.31"
Minimum workpiece (L x W)0.39" x 0.39"
Maximum workpiece (L x W)5.31" x 5.31"
Height of workpiece (min - max)0.39" - 5.91"
Maximum load capacity robot arm26.45 lbs
Maximum total weight on table 793.66 lbs
Max. number of workpieces for grid plate 10-20 mm188
Max. number of workpieces for grid plate 10-35 mm104
Max. number of workpieces for grid plate 10-55 mm64
Max. number of workpieces for grid plate 10-85 mm38
Max. number of workpieces for grid plate 10-115 mm18
Max. number of workpieces for grid plate 10-135 mm14
Grid plate is height-adjustable in several positions

System

Rigid industrial construction
Placed on 4-point self-centering anchors
Fanuc 6-axis robot arm26.45 lbs
Workpiece turnover station for two-sided machiningOption
Status lightOption
Can be connected to any CNC machine
Movable for transport and maintenance with easy repositioningby pallet truck
Automatic servo-driven door opener with integrated safety mechanismOption

HALTER SmartControl

Standard Features

Intuitive and graphical programming in 12 steps
Touch screen 15 inch
Free choice of pre-installed language
Graphic representation of machine utilization
Input can be entered in inches or mm
Automatic program storage

Standard functionalities

Inside and outside gripping
Workpiece loading in chuck with or without pressure star
Adjustable air blow distance
Working with spindle orientation of the CNC machine
Eccentric loading and unloading
Robot park positioning

Grippers

3-finger gripper or 2-finger gripperChoice
Separate grippers for raw and machined workpieces
Air blow system
Workpiece detection
Quickly adjustable gripper fingers
Workpiece-specific gripper fingersOption
Steplessly adjustable gripping force
Compact gripper design

Safety

Fanuc DCS area in combination with the Sick floor scanner
Closed safety circuit
270º laser scanner with stop and go function
Floor scanner slows down and stops the robot arm if operator approaches

Input

Voltage 208 V
Peak consumption30 A
Compressed air pressure94.3 psi

Dimensions

Length67.32"
Width30.70"
Height86.61"
Total weight 1358 lbs

Practical steps on the way to an efficient production process

Practical steps

 

We will be happy to guide you through the following steps

  • Discuss which machine you would like to automate

  • Explanation of the principle of Halter solutions and our portfolio

  • Demonstration how easy it is to operate a plug-and-play robot

  • Personalised advice on which solution is right for you

  • Explanation of the implementation process: interface, installation and training

WORKPIECE-SPECIFIC SOLUTIONS

Halter's application engineering team can design grid plates and special gripper fingers for your specific workpieces. For example, if you have castings or workpieces that you need to be automated in a specific way. All these customer-specific solutions can be implemented in the user-friendly HALTER SmartControl. The flexibility of the solutions we offer allows you to automate even more different workpieces.

Workpieces-collection-2

 

Related products

Universal Compact 12

Universal Compact 12

The Universal Premium 25/35 is a robotic loading solution for turning and milling, covering the complete range of workpieces up to 10.63".

View model

Universal Premium 25/35

Universal Premium 25/35

The Universal Premium 25/35 is a robotic loading solution for turning and milling, covering the complete range of workpieces up to 270 mm.

View model

Universal Big 35/70

Universal Big 35/70

The Universal Big 35/70 is a turning and milling robotic loading solution designed especially for heavy workpieces. It also offers a high capacity for shaft handling up to 23.62".

View model

REAL CUSTOMERS. REAL STORIES. REAL RESULTS.

The HALTER LoadAssistant is designed to improve the production output with simple and affordable automation. Read our customers' stories here.
Joseph Hurley, CEO | Pro Products, Inc.

"We are achieving our production target with just one CNC operator."

Read more
Rick Hoffman, CEO | EIMCo LLC

"We can easily move the Halter from one machine to the other."

Read more
Matt James, President | M&M Precision Machining

"With the Halter TurnStacker Premium 20 we manufacture 30% more parts each day."

Read more
Randy Decker, Owner | Decker Precision Machining Inc.

"My operators can work with the Halter; no robot knowledge is required at all."

Read more
Jason Winter, Son of the Founder | Rusco Manufacturing, Inc.

"With Halter our machining centers can be unmanned for longer periods of time."

Read more
Udo Jahn, Director | Modern Engineering Ltd.

"Easy setup and now it has been installed on two of our Nakamuras and it completely meets our expectations."

Read more
Frank O'Connor, Director | Superior Metal Products, Inc.

"I have never been told by a CNC machinist that her or his favorite part of the job is the loading and unloading of parts."

Read more
#}