Samenvatting voor overzicht:

The Universal Compact 12 is a robotic loading solution for turning and milling with the smallest footprint in our Universal product range, at the most competitive price in the market.

  • Workpiece diameter (min - max) 10 mm - 135 mm
  • Maximum workpiece (L x W) 135 mm x 135 mm
  • Maximum load capacity robot arm 12 kg
  •  Maximum height of workpiece 250 mm

Universal Compact 12

Turning/milling

The Universal Compact 12 is a robotic loading solution for turning and milling with the smallest footprint in our Universal product range, at the most competitive price in the market. A shaft handling option is available for workpieces up to 250 mm.

Increase your efficiency with a set up time that is shorter than 5 minutes and prepare a new batch while the robot is running.

The Universal Compact is easily moved from one CNC machine to another. 

Your benefits with Halter

  • Short delivery time
  • Turn-key installation
  • Local and remote support
  • Favorable financing

 

Download spec sheet

Download spec sheet

Universal-Compact-12

Capacity & specifications

Rigid industrial construction
Rotating loading table
Full enclosure and protection
Movableby pallet truck
Placed on 3-point self-centering anchors
Fanuc 6-axis robot arm12 kg
Workpiece side-gripping stationOption
Workpiece turnover station for two-sided machiningOption
Status lightOption
Standard robot-machine interface for every CNC machine
Intuitive and graphical programming in 12 steps
Touch screen15 inch
Free choice of pre-installed language
Input can be entered in inches or mm
Software analysis for machine utilization
Automatic program storage
Max. number of CNC machines to connect with4

HALTER SmartControl standard functionalities

Positioning workpiece in machine vise with soft push function
Workpiece regripping for accurate positioning
Unload-only function in combination with bar feeder
Inside and outside gripping
Workpiece loading in chuck with or without pressure star
Adjusting airblow distance
Working with spindle orientation of the CNC machine
Eccentric loading and unloading
Robot park positioning button

HALTER SmartControl enables the following optional functionalities

Workpiece turnover function for two-sided machiningOption
Unloading workpiece on palletOption
Unloading workpiece on external fixed position, e.g. conveyor beltOption
Unloading of residual materialOption
Collecting a workpiece from a revolver tool Option
Cleaning of workpiece outside the CNC machineOption
Positioning workpiece on measuring stationOption
Removal of rejected workpiecesOption
Workpiece side-grippingOption
Radial positioning of the workpiece in the chuckOption
Shaft handlingOption
Customer-specific functionalities On request
2-finger gripper for rectangular workpiecesOption
3-finger gripper for round workpiecesOption
2-finger gripper for shaft handlingOption
Separate grippers for raw and machined workpieces
Airblow system
Workpiece detection system by open/close message
Quick change system for exchanging grippersOption
Quickly adjustable gripper fingers
Workpiece-specific gripper fingersOption
Pressure sensor on the robot arm monitors air pressure
In-machine-space function
Fanuc DCS area in combination with the Sick floor scanner
Sliding door provided with safety sensors
Standard safety fence between CNC machine and the Halter
Autom. servo-driven door opener with integrated safety mechanismOption
Closed safety circuit
Voltage 400 V
Peak consumption16 A
Compressed air pressure6,5 bar
Length1315 mm
Width1200 mm
Height2010 mm
Total weight 800 kg
Workpiece diameter (min - max)10 mm - 135 mm
Minimum workpiece (L x W)10 mm x 10 mm
Maximum workpiece (L x W)135 mm x 135 mm
Height of workpiece (min - max)10 mm - 150 mm
Maximum load capacity robot arm12 kg
Maximum total weight on rotating table 400 kg
Max. number of workpieces for grid plate 10-20 mm190
Max. number of workpieces for grid plate 10-35 mm116
Max. number of workpieces for grid plate 23-55 mm62
Max. number of workpieces for grid plate 23-85 mm36
Max. number of workpieces for grid plate 23-115 mm20
Max. number of workpieces for grid plate 23-135 mm18
Workpiece-specific grid platesOption

Capacity for shaft handling

Workpiece diameter (min - max)10 mm - 40 mm
Minimum workpiece (L x W)10 mm x 10 mm
Maximum workpiece (L x W)40 mm x 40 mm
Height of workpiece (min - max)150 mm - 250 mm
Maximum weight of workpiece2,5 kg
Maximum load capacity robot arm12 kg
Maximum total weight on rotating table 400 kg
Max. number of workpieces for grid plate 10-20 mm190
Max. number of workpieces for grid plate 10-35 mm116
Max. number of workpieces for grid plate 23-55 mm62

System

Rigid industrial construction
Rotating loading table
Full enclosure and protection
Movableby pallet truck
Placed on 3-point self-centering anchors
Fanuc 6-axis robot arm12 kg
Workpiece side-gripping stationOption
Workpiece turnover station for two-sided machiningOption
Status lightOption
Standard robot-machine interface for every CNC machine

HALTER SmartControl

Intuitive and graphical programming in 12 steps
Touch screen15 inch
Free choice of pre-installed language
Input can be entered in inches or mm
Software analysis for machine utilization
Automatic program storage
Max. number of CNC machines to connect with4

HALTER SmartControl standard functionalities

Positioning workpiece in machine vise with soft push function
Workpiece regripping for accurate positioning
Unload-only function in combination with bar feeder
Inside and outside gripping
Workpiece loading in chuck with or without pressure star
Adjusting airblow distance
Working with spindle orientation of the CNC machine
Eccentric loading and unloading
Robot park positioning button

HALTER SmartControl enables the following optional functionalities

Workpiece turnover function for two-sided machiningOption
Unloading workpiece on palletOption
Unloading workpiece on external fixed position, e.g. conveyor beltOption
Unloading of residual materialOption
Collecting a workpiece from a revolver tool Option
Cleaning of workpiece outside the CNC machineOption
Positioning workpiece on measuring stationOption
Removal of rejected workpiecesOption
Workpiece side-grippingOption
Radial positioning of the workpiece in the chuckOption
Shaft handlingOption
Customer-specific functionalities On request

Grippers

2-finger gripper for rectangular workpiecesOption
3-finger gripper for round workpiecesOption
2-finger gripper for shaft handlingOption
Separate grippers for raw and machined workpieces
Airblow system
Workpiece detection system by open/close message
Quick change system for exchanging grippersOption
Quickly adjustable gripper fingers
Workpiece-specific gripper fingersOption
Pressure sensor on the robot arm monitors air pressure

Safety

In-machine-space function
Fanuc DCS area in combination with the Sick floor scanner
Sliding door provided with safety sensors
Standard safety fence between CNC machine and the Halter
Autom. servo-driven door opener with integrated safety mechanismOption
Closed safety circuit

Input

Voltage 400 V
Peak consumption16 A
Compressed air pressure6,5 bar

Dimensions

Length1315 mm
Width1200 mm
Height2010 mm
Total weight 800 kg

Capacity

Workpiece diameter (min - max)10 mm - 135 mm
Minimum workpiece (L x W)10 mm x 10 mm
Maximum workpiece (L x W)135 mm x 135 mm
Height of workpiece (min - max)10 mm - 150 mm
Maximum load capacity robot arm12 kg
Maximum total weight on rotating table 400 kg
Max. number of workpieces for grid plate 10-20 mm190
Max. number of workpieces for grid plate 10-35 mm116
Max. number of workpieces for grid plate 23-55 mm62
Max. number of workpieces for grid plate 23-85 mm36
Max. number of workpieces for grid plate 23-115 mm20
Max. number of workpieces for grid plate 23-135 mm18
Workpiece-specific grid platesOption

Capacity for shaft handling

Workpiece diameter (min - max)10 mm - 40 mm
Minimum workpiece (L x W)10 mm x 10 mm
Maximum workpiece (L x W)40 mm x 40 mm
Height of workpiece (min - max)150 mm - 250 mm
Maximum weight of workpiece2,5 kg
Maximum load capacity robot arm12 kg
Maximum total weight on rotating table 400 kg
Max. number of workpieces for grid plate 10-20 mm190
Max. number of workpieces for grid plate 10-35 mm116
Max. number of workpieces for grid plate 23-55 mm62

Universal models can be extended with additional features

Custom-grid-plate Copy 2
Workpiece-specific solutions

Halter’s application engineering team can design special grid plates and gripper fingers for your specific workpieces.

For example, if you want to automate castings or other workpieces which need special handling. All these custom solutions can be implemented in the user-friendly HALTER SmartControl. The flexibility of the solutions that we offer ensures that you can automate even greater variation of workpieces.

 

OPTIONAL FUNCTIONALITIES

  • Unloading workpiece on pallet

  • Unloading workpiece on external fixed position, e.g. conveyor belt

  • Unloading of residual material

  • Collecting a workpiece from a revolver tool

  • Cleaning of workpiece outside the CNC machine

Universal models can be extended with additional features

Custom-grid-plate-1


SHAFT HANDLING

The HALTER Universal is deliverable with the shaft handling option, which enables you to load workpieces with a height of up to 600 mm, depending on the model. For this option, we supply the complete package of an additional 2-finger gripper, gripper fingers for a range of diameters, extended height-adjustable pins to support the grid plates and a regripping station.

 

 

 

  • Positioning workpiece on measuring station

  • Removal of rejected workpieces

  • Workpiece side-gripping

  • Workpiece orientation in chuck of the CNC machine

  • Customer-specific functionalities

How it works

Hundreds of LoadAssistants are being used by satisfied customers. Through an international network of certified partners and Halter field service engineers, you can expect the very best from us.  Like short delivery times, turnkey delivery, set-up and training. In 95% of cases, our customers achieve a return on investment of less than 18 months.

COMMITTED TO PERFORMANCE. DEDICATED TOT DELIVER.

Quotation or personal advice?

If you are interested in the HALTER LoadAssistant and would like to receive a quotation or tailored advice, please click on the button below and fill in the form. One of our experts will contact you as soon as possible.

Request a quote

Why our customers choose the HALTER LoadAssistant

Nigel Eames, Production Manager | FB Chain Ltd

"The Halter enables us to immediately increase production when needed, without extra personnel."

Read more
Mr. Dietrich, Production Manager | Naber-Zeeh Präzision GmbH

"The HALTER LoadAssistant guarantees a continuous production process."

Read more
HALTER CNC automation workshop

Halter workshops

Discover the simplicity of the HALTER LoadAssistant during a customized workshop for your company in one of the HALTER Technology Centers or at our reference customer in your area.

Online demo is also possible!

What do you know at the end of the workshop?

  • You know how it works and what the HALTER can
  • You can set and run the robot by yourself
  • You know where and how the HALTER fits optimal in your production
  • You know how quickly the HALTER can be earned back in your company
Register for workshop