+49 2835 955 3990

Basic Pro 12

Industrial technology for the price of a cobot system

BASIC 12 COMPACT 12 PREMIUM 25/35 BIG 35/70
HALTER Basic Pro 12 (resized)-2
HALTER Basic Pro 12 (resized)-2

Basic Pro 12

Turning/Milling

Basic Pro is our basic loading robot for turning and milling.

  • For turning and milling

  • Maximum diameter 135 mm - maximum dimension LxW 135 mm x 135 mm

  • Industrial Fanuc robot and high-quality components for a long, reliable service life

  • New series set-up within 5 minutes

  • No compromise on safety - with floor scanner and safety zone

  • Minimum floor space

  • Industrial technology for the price of a cobot system

Book online demo Download spec sheet
HALTER BasicPro 12 - front-4 HALTER Basic Pro 12 - side-3

 

Intuitive and accessible

  • No robot experience required

  • Programme configured in just a few steps

  • Setup time of less than 5 minutes

  • Ingenious in its simplicity

Capacity & Specifications

Workpiece diameter (min - max)10 mm - 135 mm
Minimum workpiece (L x W)10 mm x 10 mm
Maximum workpiece (L x W)135 mm x 135 mm
Height of workpiece (min - max)10 mm - 200 mm
Maximum load capacity robot arm12 kg
Maximum total weight on table 360 kg
Max. number of workpieces for grid plate 10-20 mm188
Max. number of workpieces for grid plate 10-35 mm104
Max. number of workpieces for grid plate 10-55 mm64
Max. number of workpieces for grid plate 10-85 mm38
Max. number of workpieces for grid plate 10-115 mm18
Max. number of workpieces for grid plate 10-135 mm14
Grid plate is height-adjustable in several positions
Rigid industrial construction
Placed on 4-point self-centering anchors
Fanuc 6-axis robot arm12 kg
Workpiece turnover station for two-sided machiningOption
Status lightOption
Can be connected to any CNC machine
Movable for transport and maintenance with easy repositioningby pallet truck
Automatic servo-driven door opener with integrated safety mechanismOption
Intuitive and graphical programming in 12 steps
Touch screen 15 inch
Free choice of pre-installed language
Input can be entered in inches or mm
Input can be entered in inches or mm
Automatic program storage

HALTER SmartControl standard functionalities

Inside and outside gripping
Workpiece loading in chuck with or without pressure star
Adjustable air blow distance
Working with spindle orientation of the CNC machine
Eccentric loading and unloading
Robot park positioning
Adjusting airblow distance
Working with spindle orientation of the CNC machine
Eccentric loading and unloading
Robot park positioning button
2-finger or 3-finger gripper Choice
Separate grippers for raw and machined workpieces
Air blow system
Workpiece detection
Quickly adjustable gripper fingers
Workpiece-specific gripper fingersOption
Pneumatic pressure monitoring
Compact gripper design
Fanuc DCS area in combination with the Sick floor scanner
Closed safety circuit
270º laser scanner with stop and go function
Floor scanner slows down and stops the robot arm if operator approaches
Voltage 400 V
Peak consumption16 A
Compressed air pressure6,5 bar
Length1710 mm
Width780 mm
Height2200 mm
Total weight 656 kg

Capacity
Workpiece diameter (min - max)10 mm - 135 mm
Minimum workpiece (L x W)10 mm x 10 mm
Maximum workpiece (L x W)135 mm x 135 mm
Height of workpiece (min - max)10 mm - 200 mm
Maximum load capacity robot arm12 kg
Maximum total weight on table 360 kg
Max. number of workpieces for grid plate 10-20 mm188
Max. number of workpieces for grid plate 10-35 mm104
Max. number of workpieces for grid plate 10-55 mm64
Max. number of workpieces for grid plate 10-85 mm38
Max. number of workpieces for grid plate 10-115 mm18
Max. number of workpieces for grid plate 10-135 mm14
Grid plate is height-adjustable in several positions

System
Rigid industrial construction
Placed on 4-point self-centering anchors
Fanuc 6-axis robot arm12 kg
Workpiece turnover station for two-sided machiningOption
Status lightOption
Can be connected to any CNC machine
Movable for transport and maintenance with easy repositioningby pallet truck
Automatic servo-driven door opener with integrated safety mechanismOption

HALTER SmartControl
Intuitive and graphical programming in 12 steps
Touch screen 15 inch
Free choice of pre-installed language
Input can be entered in inches or mm
Input can be entered in inches or mm
Automatic program storage

HALTER SmartControl standard functionalities

Inside and outside gripping
Workpiece loading in chuck with or without pressure star
Adjustable air blow distance
Working with spindle orientation of the CNC machine
Eccentric loading and unloading
Robot park positioning
Adjusting airblow distance
Working with spindle orientation of the CNC machine
Eccentric loading and unloading
Robot park positioning button

Grippers
2-finger or 3-finger gripper Choice
Separate grippers for raw and machined workpieces
Air blow system
Workpiece detection
Quickly adjustable gripper fingers
Workpiece-specific gripper fingersOption
Pneumatic pressure monitoring
Compact gripper design

Safety
Fanuc DCS area in combination with the Sick floor scanner
Closed safety circuit
270º laser scanner with stop and go function
Floor scanner slows down and stops the robot arm if operator approaches

Input
Voltage 400 V
Peak consumption16 A
Compressed air pressure6,5 bar

Dimensions
Length1710 mm
Width780 mm
Height2200 mm
Total weight 656 kg

Practical steps on the way to an efficient production process

Practical steps

 

We will be happy to guide you through the following steps

  • Discuss which machine you would like to automate

  • Explanation of the principle of Halter solutions and our portfolio

  • Demonstration how easy it is to operate a plug-and-play robot

  • Personalised advice on which solution is right for you

  • Explanation of the implementation process: interface, installation and training

We are happy to help you

Contact Expert

phone

Speak to an expert about the possibilities for your business.

arr-right-orange

Request online demo

board

Sign up for a 45-minute online demo.

arr-right-orange

Request a quote

offerte

Receive an appropriate quote based on your requirements.

arr-right-orange

WORKPIECE-SPECIFIC SOLUTIONS

Halter's application engineering team can design grid plates and special gripper fingers for your specific workpieces. For example, if you have castings or workpieces that you need to be automated in a specific way. All these customer-specific solutions can be implemented in the user-friendly HALTER SmartControl. The flexibility of the solutions we offer allows you to automate even more different workpieces.

Workpieces-collection-2

 

Related products

Universal Compact 12

Universal Compact 12

The Universal Compact 12 is a robotic loading solution for turning and milling with the smallest footprint in our Universal product range, at the most competitive price in the market. covering the complete range of workpieces up to 135 mm.

View model

Universal Premium 25/35

Universal Premium 25/35

The Universal Premium 25/35 is a robotic loading solution for turning and milling, covering the complete range of workpieces up to 270 mm.

View model

Universal Big 35/70

Universal Big 35/70

The Universal Big 35/70 is a robotic loading solution for turning and milling and is designed especially for loading heavy workpieces.  It also has a high capacity for shaft handling up to 600 mm.

View model

REAL CUSTOMERS. REAL STORIES. REAL RESULTS.

The HALTER LoadAssistant is designed to improve the production output with simple and affordable automation. Read our customers' stories here.
Joseph Hurley, CEO | Pro Products, Inc.

"We are achieving our production target with just one CNC operator."

Read more
Martin Richter, Project Manager | Tornado Antriebstechnik

"We achieve a spindle efficiency of 92% thanks to the HALTER LoadAssistant."

Read more
Tom Hogeling, Owner | Odemar Metaal B.V.

"Because the HALTER LoadAssistant could be adapted to our specific needs, we can produce more flexibly and efficiently."

Read more
Boris Malek, Owner | FEWI d.o.o.

"The operation of the HALTER LoadAssistant is literally childishly simple."

Read more
Rainer Reimer, Owner | Alfred Reimer GmbH

"We produce at a more favorable price than low-wage countries."

Read more
Remco van der Voorden, Director | Geotech Metals BV

"We produce much more without hiring additional operators."

Read more
Reinhard Panzer, Owner | Panzer Drehtechnik GmbH

"Robot knowledge is not necessary and that is exactly what we need to secure our future."

Read more
All customer cases

Contact Europe

HALTER CNC Automation GmbH
Gewerbering 7
47661 Issum
Germany

T: +49 2835 955 3990‬
info@haltercnc.com

VAT ID: DE326335222
Company ID: HRB 16121



Find a dealer

Contact North America

HALTER CNC Robotics LLC
21995 Fillmore Road
Cascade, Iowa 52033
United States

T: 800 314 8261
info@haltercncrobotics.com

VAT ID: US473961908

Quick links

Products

Stay up to date

Follow us on social media
© 2025 Halter Group